linux 3.13版本nvme驱动阅读记录二-CSDN博客

阿里云国内75折 回扣 微信号：monov8
阿里云国际，腾讯云国际，低至75折。AWS 93折 免费开户实名账号 代冲值 优惠多多 微信号：monov8 飞机：@monov6

这里主要记录nvme_dev_start函数的阅读记录

内核3.13版本。

static int nvme_dev_start(struct nvme_dev *dev)
{
	int result;

	result = nvme_dev_map(dev); //pcie bar空间映射
	if (result)
		return result;

	result = nvme_configure_admin_queue(dev); //管理队列配置
	if (result)
		goto unmap;

	spin_lock(&dev_list_lock);
	list_add(&dev->node, &dev_list); //dev_list没太明白是定义在那个文件的
	spin_unlock(&dev_list_lock);

	result = nvme_setup_io_queues(dev); //io队列配置
	if (result && result != -EBUSY)
		goto disable;

	return result;
disable:
	spin_lock(&dev_list_lock);
	list_del_init(&dev->node);
	spin_unlock(&dev_list_lock);
unmap:
	nvme_dev_unmap(dev);
	return result;
}

该函数主要做了4减事情。
1nvme_dev_map主要就是pci bar 那一套编程套路
2管理队列的配置
3dev_list?
4io队列的配置

nvme_dev_map

static int nvme_dev_map(struct nvme_dev *dev)
{
	int bars, result = -ENOMEM;
	struct pci_dev *pdev = dev->pci_dev;

	if (pci_enable_device_mem(pdev))
		return result;

	dev->entry[0].vector = pdev->irq;
	pci_set_master(pdev);
	bars = pci_select_bars(pdev, IORESOURCE_MEM);
	if (pci_request_selected_regions(pdev, bars, "nvme"))
		goto disable_pci;

	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)) && 
			dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))
		goto disable;

	pci_set_drvdata(pdev, dev);
	dev->bar = ioremap(pci_resource_start(pdev, 0), 8192);//bar0
	if (!dev->bar)
		goto disable;

	dev->db_stride = NVME_CAP_STRIDE(readq(&dev->bar->cap)); //doorbell stride 32-35
	dev->dbs = ((void __iomem *)dev->bar) + 4096; //sq tail
	return 0;
disable:
	pci_release_regions(pdev);
disable_pci:
	pci_disable_device(pdev);
	return result;
}

这个函数没啥介绍的对应的unmap如下

static void nvme_dev_unmap(struct nvme_dev *dev)
{
	if(dev->pci_dev->msi_enabled)
		pci_disable_msi(dev->pci_dev);
	else if (dev->pci_dev->msix_enabled)
		pci_disable_msix(dev->pci_dev);

	if(dev->bar) {
		iounmap(dev->bar);
		dev->bar = NULL;
	}
	pci_release_regions(dev->pci_dev);
	if (pci_is_enabled(dev->pci_dev))
		pci_disable_device(dev->pci_dev);
}

nvme_configure_admin_queue

static int nvme_configure_admin_queue(struct nvme_dev *dev)
{
	int result;
	u32 aqa;
	u64 cap = readq(&dev->bar->cap);
	struct nvme_queue *nvmeq;

	result = nvme_disable_ctrl(dev, cap); //根据文档说明,配置队列时先disable控制器
	if (result < 0)
		return result;

	nvmeq = dev->queues[0];
	if (!nvmeq) {
		nvmeq = nvme_alloc_queue(dev, 0, 64, 0);//admin 队列深度为64
		if (!nvmeq)
			return -ENOMEM;
		dev->queues[0] = nvmeq; //保存nvmeq起始地址
	}
	aqa = nvmeq->q_depth - 1;
	aqa |= aqa << 16;
	//使能控制器状态
	dev->ctrl_config = NVME_CC_ENABLE | NVME_CC_CSS_NVM;
	//设置一个page的大小
	dev->ctrl_config |= (PAGE_SHIFT - 12) << NVME_CC_MPS_SHIFT;
	dev->ctrl_config |= NVME_CC_ARB_RR | NVME_CC_SHN_NONE;
	//配置cqe和sqe元素的大小,2^4,2^6
	dev->ctrl_config |= NVME_CC_IOSQES | NVME_CC_IOCQES; 

	writel(aqa, &dev->bar->aqa);//配置cq队列和sq队列深度
	writeq(nvmeq->sq_dma_addr, &dev->bar->asq); //配置sq队列dma起始地址
	writeq(nvmeq->cq_dma_addr, &dev->bar->acq); //配置cq队列dma起始地址
	/*
		cc->Controller Configuration
		31-24 : Reserved
		23-20 : I/O Completion queue entry size
		19-16 : I/O Submission Queue Entry Size
		15-14 : Shutdown Notification
		13-11 : Arbitration Mechanism Selected
		10-7 : Memory Page size
		6-4 : IO Command Set Selected
		3-1 : Reserved
		0 : Enable
	*/
	writel(dev->ctrl_config, &dev->bar->cc);//这里使能了控制器
	//读Controller Configuration的第一个bit,判断控制器是否已经enable
	result = nvme_enable_ctrl(dev, cap);
	if (result)
		return result;

	result = queue_request_irq(dev, nvmeq, "nvme admin");
	if (result)
		return result;

	spin_lock(&nvmeq->q_lock);
	nvme_init_queue(nvmeq, 0); //admin queue初始化
	spin_unlock(&nvmeq->q_lock);
	return result;
}

注释都解释的比较清楚了这里在贴一些相关函数调用的代码。

enable/disable控制器相关的。起始就是对寄存器的一些值的判断。

static int nvme_wait_ready(struct nvme_dev *dev, u64 cap, bool enabled)
{
	unsigned long timeout;
	u32 bit = enabled ? NVME_CSTS_RDY : 0;

	timeout = ((NVME_CAP_TIMEOUT(cap) + 1) * HZ / 2) + jiffies;
	while ((readl(&dev->bar->csts) & NVME_CSTS_RDY) != bit) {
		msleep(100);
		if (fatal_signal_pending(current))//可以被一些fatal的信号打断
			return -EINTR;
		if (time_after(jiffies, timeout)) { //jiffies比timeout靠后返回1
			dev_err(&dev->pci_dev->dev, "Device not ready; aborting initialisation\n");
			return -ENODEV;
		}
	}
	return 0;
}

static int nvme_disable_ctrl(struct nvme_dev *dev, u64 cap)
{
	u32 cc = readl(&dev->bar->cc);

	if (cc & NVME_CC_ENABLE)
		writel(cc & ~NVME_CC_ENABLE, &dev->bar->cc);//取反使能bit
	return nvme_wait_ready(dev, cap, false);
}

static int nvme_enable_ctrl(struct nvme_dev *dev, u64 cap)
{
	return nvme_wait_ready(dev, cap, true);
}

队列的alloc

static struct nvme_queue *nvme_alloc_queue(struct nvme_dev *dev, int qid, int depth, int vector)
{
	struct device *dmadev = &dev->pci_dev->dev;
	unsigned extra = nvme_queue_extra(depth);
	struct nvme_queue *nvmeq = kzalloc(sizeof(*nvmeq) + extra, GFP_KERNEL);
	if (!nvmeq)
		return NULL;

	nvmeq->cqes = dma_alloc_coherent(dmadev, CQ_SIZE(depth), &nvmeq->cq_dma_addr, GFP_KERNEL);
	if (!nvmeq->cqes)
		goto free_nvmeq;
	memset((void *)nvmeq->cqes, 0, CQ_SIZE(depth));

	nvmeq->sq_cmds = dma_alloc_coherent(dmadev, SQ_SIZE(depth), &nvmeq->sq_dma_addr, GFP_KERNEL);
	if (!nvmeq->sq_cmds)
		goto free_cqdma;

	nvmeq->q_dmadev = dmadev;
	nvmeq->dev = dev;
	spin_lock_init(&nvmeq->q_lock);//队列的自旋锁
	nvmeq->cq_head = 0;//cq head位置
	nvmeq->cq_phase = 1;//后续需要它确定cq tail的位置
	init_waitqueue_head(&nvmeq->sq_full);//初始化等待队列头
	init_waitqueue_entry(&nvmeq->sq_cong_wait, nvme_thread);//初始化等待队列
	bio_list_init(&nvmeq->sq_cong);//初始化bio 链表(单向链表)
	nvmeq->q_db = &dev->dbs[qid << (dev->db_stride + 1)];//qid队列的门铃寄存器基地址
	nvmeq->q_depth = depth;//队列深度
	nvmeq->cq_vector = vector;//队列的中断向量
	nvmeq->q_suspended = 1;//还没初始化所以这个先设置为1
	dev->queue_count++;//总的队列个数加一

	return nvmeq;
free_cqdma:
	dma_free_coherent(dmadev, CQ_SIZE(depth), (void *)nvmeq->cqes, nvmeq->cq_dma_addr);
free_nvmeq:
	kfree(nvmeq);
	return NULL;
}

static unsigned nvme_queue_extra(int depth)
{
	/*
		DIV_ROUND_UP(depth, 8)用来记录bit位(一共有depth个bit)
		depth * sizeof(struct nvme_cmd_info)用来记录depth个bit的struct nvme_cmd_info信息
	*/
	return DIV_ROUND_UP(depth, 8) + (depth * sizeof(struct nvme_cmd_info));
}

队列的init:

static void nvme_init_queue(struct nvme_queue *nvmeq, u16 qid)
{
	struct nvme_dev *dev = nvmeq->dev;
	unsigned extra = nvme_queue_extra(nvmeq->q_depth);

	nvmeq->sq_tail = 0;
	nvmeq->cq_head = 0;
	nvmeq->cq_phase = 1;
	nvmeq->q_db = &dev->dbs[qid << (dev->db_stride + 1)];
	memset(nvmeq->cmdid_data, 0, extra);
	memset((void *)nvmeq->cqes, 0, CQ_SIZE(nvmeq->q_depth));
	nvme_cancel_ios(nvmeq, false);
	nvmeq->q_suspended = 0;
}

static void nvme_cancel_ios(struct nvme_queue *nvmeq, bool timeout)
{
	int depth = nvmeq->q_depth - 1;
	struct nvme_cmd_info *info = nvme_cmd_info(nvmeq);
	unsigned long now = jiffies;
	int cmdid;

	for_each_set_bit(cmdid, nvmeq->cmdid_data, depth) { //从第一个bit开始遍历每一个bit返回被置位(值为1)的位置
		void *ctx;
		nvme_completion_fn fn;
		static struct nvme_completion cqe = {
			.status = cpu_to_le16(NVME_SC_ABORT_REQ << 1), //7 << 1
		};
		/*
			初始化时timeout为0所以流程不会走到下面
			now比info[cmdid].timeout大函数返回1,
			所以流程要往下走,time_afte函数要返回1(即时间超时now大于timeout)
		*/
		if (timeout && !time_after(now, info[cmdid].timeout))
			continue;
		if (info[cmdid].ctx == CMD_CTX_CANCELLED) //也有可能是这个(提交的命令出现错误的情况)因为bit还没清所以遍历的时候是有这种情况的
			continue;
		dev_warn(nvmeq->q_dmadev, "Cancelling I/O %d\n", cmdid)
		ctx = cancel_cmdid(nvmeq, cmdid, &fn);
		fn(nvmeq->dev, ctx, &cqe);
	}
}

io队列的配置

static int nvme_setup_io_queues(struct nvme_dev *dev)
{
	struct pci_dev *pdev = dev->pci_dev;
	int result, cpu, i, vecs, nr_io_queues, size, q_depth;

	nr_io_queues = num_online_cpus();
	result = set_queue_count(dev, nr_io_queues);
	if (result < 0)
		return result;
	if (result < nr_io_queues)
		nr_io_queues = result;

	size = db_bar_size(dev, nr_io_queues);
	if (size > 8192) { //因为dev_map函数里map的size是8192,大于8192需要重新映射
		iounmap(dev->bar);//先解除映射
		do {
			dev->bar = ioremap(pci_resource_start(pdev, 0), size);//再重新映射
			if (dev->bar)//如果一次性映射成功是最好的
				break;
			if (!--nr_io_queues)//如果一次性映射不成功那么就逐步减少nr_io_queues的值直到映射成功
				return -ENOMEM;
			size = db_bar_size(dev, nr_io_queues);//重新计算nr_io_queues减少以后的size,直到map成功
		} while (1);
		//管理队列的需要重新赋值
		dev->dbs = ((void __iomem *)dev->bar) + 4096;
		dev->queues[0]->q_db = dev->dbs;
	}
	//注销管理队列的中断
	free_irq(dev->entry[0].vector, dev->queues[0]);
	vecs = nr_io_queues;
	//entry 初始化
	for (i = 0; i < vecs; i++)
		dev->entry[i].entry = i;
	for (;;) {
		//请求分配vecs个中断返回0表示成功
		result = pci_enable_msix(pdev, dev->entry, vecs);
		if (result <= 0)
			break;
		vecs = result;
	}
	if (result < 0) { //考虑result小于0的情况
		vecs = nr_io_queues;
		if (vecs > 32)
			vecs = 32;
		for (;;) {
			result = pci_enable_msi_block(pdev, vecs);
			if (result == 0) {
				for (i = 0; i < vecs; i++)
					dev->entry[i].vector = i + pdev->irq;
				break;
			} else if (result < 0) {
				vecs = 1;
				break;
			}
			vecs = result;
		}
	}
	//应该调查分配比中断向量更多的队列是否有性能优势;它可能允许提交路径更好地扩展即使接收路径受到中断数量的限制。
	nr_io_queues = vecs;
	result = queue_request_irq(dev, dev->queues[0], "nvme admin");
	if (result) {
		dev->queues[0]->q_suspended = 1;
		goto free_queues;
	}
	/*
		释放以前分配的不再可用的队列,即队列id比nr_io_queues还大的队列
		不过这里感觉应该不会进来因为前面只创建了管理队列
	*/
	spin_lock(&dev_list_lock);
	for (i = dev->queue_count - 1; i > nr_io_queues; i--) {
		struct nvme_queue *nvmeq = dev->queues[i];

		spin_lock(&nvmeq->q_lock);
		nvme_cancel_ios(nvmeq, false);
		spin_unlock(&nvmeq->q_lock);

		nvme_free_queue(nvmeq);
		dev->queue_count--;
		dev->queues[i] = NULL;
	}
	spin_unlock(&dev_list_lock);
	/*将不同的队列和cpu进行绑定*/
	cpu = cpumask_first(cpu_online_mask);
	for (i = 0; i < nr_io_queues; i++) {
		//https://zhuanlan.zhihu.com/p/163850501
		irq_set_affinity_hint(dev->entry[i].vector, get_cpu_mask(cpu));
		cpu = cpumask_next(cpu, cpu_online_mask);
	}
	/*
		page45
		Maximum Queue Entries Supported (MQES):该字段表示控制器支持的最大单个队列大小。
		对于基于pcie实现的NVMe此值适用于主机创建的I/O提交队列和I/O完成队列。对于基于fabricimplementation的NVMe
		这个值只适用于主机创建的I/O提交队列。这是一个基于0的值。最小值为1h即2条
	*/
	q_depth = min_t(int, NVME_CAP_MQES(readq(&dev->bar->cap)) + 1, NVME_Q_DEPTH);
	for (i = dev->queue_count - 1; i < nr_io_queues; i++) {
		dev->queues[i + 1] = nvme_alloc_queue(dev, i + 1, q_depth, i);
		if (!dev->queues[i + 1]) {
			result = -ENOMEM;
			goto free_queues;
		}
	}
	for (; i < num_possible_cpus(); i++) {
		//该函数是取数的最高二进制阶数,即将给定值四舍五入到最接近的二次方
		int target = i % rounddown_pow_of_two(dev->queue_count - 1);
		dev->queues[i + 1] = dev->queues[target + 1];
	}
	//创建io queue索引从1开始
	for (i = 1; i < dev->queue_count; i++) {
		result = nvme_create_queue(dev->queues[i], i);
		if (result) {
			for (--i; i > 0; i--)
				nvme_disable_queue(dev, i);
			goto free_queues;
		}
	}
	return 0;
free_queues:
	nvme_free_queues(dev);
	return result;
}

static int set_queue_count(struct nvme_dev *dev, int count)
{
	int status;
	u32 result, q_count = (count - 1) | ((count - 1) << 16);
	/*
		设置队列个数(不包括管理队列), page212:
		0-15bit:number of I/O submission queues Requested(NSQR)
		16:31bit:Number of I/O completion queue requested(NCQR)
		最大值65535q_count设置为0说明配置的队列个数是1,如果配置
		65535将发生错误(要配置65534)
	*/
	status = nvme_set_features(dev, NVME_FEAT_NUM_QUEUES, q_count, 0, &result);
	if (status)
		return status < 0 ? -EIO : -EBUSY;
	return min(result & 0xffff, result >> 16) + 1;
}

这个函数也没啥说的看注释吧。
差不多就总结到这里了。关于nvme_dev_start函数的总结。

阿里云国内75折 回扣 微信号：monov8
阿里云国际，腾讯云国际，低至75折。AWS 93折 免费开户实名账号 代冲值 优惠多多 微信号：monov8 飞机：@monov6
标签: linux
返回列表

上一篇：中文编程软件视频推荐，自学编程电脑推荐，中文编程开发语言工具下载-CSDN博客

下一篇：3D RPG Course | Core 学习日记四：鼠标控制人物移动-CSDN博客

“linux 3.13版本nvme驱动阅读记录二-CSDN博客” 的相关文章

Linux中查看日志的常用命令1年前 (2023-02-02)
【看表情包学Linux】探讨项目构建问题 | Makefile | 依赖关系与依赖方法 | 伪目标 PHONY1年前 (2023-02-02)
【Linux】gcc-程序的翻译四个阶段（图示）1年前 (2023-02-02)
【运维】linux shell 编程之函数使用1年前 (2023-02-02)
Linux 中断子系统(三)：中断处理机制1年前 (2023-02-02)
Linux Jenkins安装配置Git_git安装配置1年前 (2023-02-02)
linux连接工具MobaXterm_linux连接工具1年前 (2023-02-02)
【Linux系统】第四篇：Linux中编辑器vim的使用1年前 (2023-02-02)
Linux chgrp 命令1年前 (2023-02-02)
如何在Linux上搭建C++开发环境1年前 (2023-02-02)

阿里云国际版