Linux OpenSSH-9.0p1最新版升级步骤详细（附脚本）

阿里云国内75折回扣微信号：monov8

阿里云国际，腾讯云国际，低至75折。AWS 93折免费开户实名账号代冲值优惠多多微信号：monov8 飞机：@monov6

前言根据国家信息安全漏洞共享平台漏洞统计报告信息安全数据泄露漏洞入侵时时刻刻都在发生着我们必须实时监控漏洞发现与威胁感知及时预警网络安全漏洞的存在以便及时整改修复漏洞避免产生更大的安全事故确保业务和系统的网络安全、稳定促进社会的和谐发展。

一、OpenSSH 介绍

OpenSSH 是 SSH （Secure SHell 协议的免费开源实现。SSH协议族可以用来进行远程控制或在计算机之间传送文件。而实现此功能的传统方式如telnet(终端仿真协议)、 rcp ftp、 rlogin、rsh都是极为不安全的并且会使用明文传送密码。OpenSSH提供了服务端后台程序和客户端工具用来加密远程控制和文件传输过程中的数据并由此来代替原来的类似服务。

二、源码包官网

目前基于最新版本 OpenSSH-9.0p1、OpenSSL1.1.1q 更新测试环境为Centos7.x以上请结合个人情况参考更新其他版本请自测

Zlib官网http://www.zlib.net/
OpenSSL官网https://www.openssl.org/
OpenSSH官网https://www.openssh.com/

注手动下载官方源码包时可能会非常慢可以去常用的镜像站点（比如清华镜像站、阿里镜像站等去下载

三、OpenSSH 安装

1.开启 telnet 服务临时关闭防火墙

由于一般登录方式为ssh所以需要安装其他登录方式比如Telnet服务防止升级失败

#安装telnet
yum install xinetd telnet-server telnet -y

#备份文件securetty
mv /etc/securetty.bak
#配置telnet登录的终端类型,增加一些pts终端
pts=$'pts/0\npts/1\npts/2\npts/3' && echo "$pts" >> /etc/securetty

#开启服务
systemctl start telnet.socket
service xinetd start

#关闭防火墙（或者开启23端口
systemctl stop firewalld.service 
systemctl disable firewalld.service

2.环境准备

#安装wget
yum install -y wget

#安装tar
yum install -y tar

#软件包准备
cd /opt   #解压目录
wget --no-check-certificate https://www.zlib.net/zlib-1.2.12.tar.gz
wget --no-check-certificate https://www.openssl.org/source/openssl-1.1.1q.tar.gz
wget --no-check-certificate https://cdn.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-9.0p1.tar.gz

#解压软件包
tar -zxvf zlib-1.2.12.tar.gz
tar -zxvf openssl-1.1.1q.tar.gz
tar -zxvf openssh-9.0p1.tar.gz

#备份
mv /etc/ssh /etc/ssh.bak
cp /etc/pam.d/sshd.pam /etc/pam.d/sshd.pam.bak
cp /etc/init.d/sshd /etc/init.d/sshd.bak
cp /usr/bin/openssl /usr/bin/openssl.bak

##卸载原有的openssh
rpm -e --nodeps `rpm -qa | grep openssh`

###安装相关依赖包
yum install vim gcc gcc-c++ glibc make autoconf openssl openssl-devel pcre-devel pam-devel zlib-devel tcp_wrappers-devel tcp_wrappers;

3.SSH安装*

3.1 Zlib安装

#进入zlib解压目录
cd /opt/zlib-1.2.12

#编译安装
./configure --prefix=/usr/local/zlib

make && make test && make install

#
ll /usr/local/zlib
ldconfig -v
/sbin/ldconfig

3.2 OpenSSL安装

注 1. SSL更新前如果编译目录下有原版本需删除后编译防止SSH编译失败 2.结尾处截图为初发文时间更新版本和操作语句新版本不冲突

#进入openssl解压目录
cd /opt/openssl-1.1.1p

#编译安装
./config shared zlib --prefix=/usr/local/ssl

make clean && make -j 4 && make install 

#更新函数库
echo "/usr/lcoal/ssl/lib" >> /etc/ld.so.conf
ldconfig
ln -s /usr/local/ssl/bin/openssl /usr/bin/openssl
ln -s /usr/local/ssl/lib/libssl.so.1.1 /usr/lib64/libssl.so.1.1
ln -s /usr/local/ssl/lib/libcrypto.so.1.1 /usr/lib64/libcrypto.so.1.1

#检查是否升级成功
openssl version -a

在这里插入图片描述

3.3 OpenSSH安装

#进入openssh解压目录
cd /opt/openssh-9.0p1

#编译安装
./configure --prefix=/usr/local/ssh --sysconfdir=/etc/ssh --with-ssl-dir=/usr/local/ssl --with-zlib=/usr/local/zlib 

make -j 4 && make install 

#查看目录版本
/usr/local/ssh/bin/ssh -V

#复制新ssh文件
cp -rf /opt/openssh-9.0p1/contrib/redhat/sshd.init /etc/init.d/sshd
cp -rf /opt/openssh-9.0p1/contrib/redhat/sshd.pam /etc/pam.d/sshd.pam
cp -rf /opt/openssh-9.0p1/sshd_config /etc/ssh/sshd_config

cp -rf /usr/local/ssh/sbin/sshd /usr/sbin/sshd
cp -rf /usr/local/ssh/bin/ssh /usr/bin/ssh
cp -rf /usr/local/ssh/bin/ssh-keygen /usr/bin/ssh-keygen

#开启sshd
chmod u+x /etc/init.d/sshd;
chkconfig --add sshd      ##自启动
chkconfig --list |grep sshd
chkconfig sshd on

#允许root登录
echo 'PermitRootLogin yes' >> /etc/ssh/sshd_config
echo 'Subsystem sftp /usr/local/ssh/libexec/sftp-server' >> /etc/ssh/sshd_config

#重启sshd服务
/etc/init.d/sshd restart
/etc/init.d/sshd status

#查看升级后ssh版本
ssh -V

在这里插入图片描述

4.关闭 telnet 服务

#关闭telnet服务
systemctl stop xinetd.service
systemctl stop telnet.socket

#卸载telnet服务
yum remove xinetd telnet-server telnet -y

#开启防火墙
systemctl start firewalld.service 
systemctl enable firewalld.service

5.SSH启动失败问题

5.1. Permissions 0737 for ‘/etc/ssh/ssh_host_rsa_key’ are too open”问题
解决方法更改报错文件权限

chmod 600 /etc/ssh/ssh_host_rsa_key
chmod 600 /etc/ssh/ssh_host_dsa_key
chmod 600 /etc/ssh/ssh_host_ecdsa_key
chmod 600 /etc/ssh/ssh_host_ed25519_key

5.2. 升级完openssh后root账号无法登录的问题
解决方法查下/etc/ssh/sshd_config的配置文件中。UsePAM 这个是否注释了去掉注释并修改为UsePAM yes

四、OpenSSH-9.0p1 升级脚本*

注考虑系统内容环境因素脚本请根据个人情况进行升级固有些差异的地方需要根据实际情况修改

#!/bin/bash
#
#########################################################
# Function :openssh-9.0p1 update                        #
# Platform :Centos7.X                                   #
# Version  :2.0                                         #
# Date     :2022-05-01                                  #     
#########################################################

clear
export LANG="en_US.UTF-8"

#版本号
zlib_version="zlib-1.2.12"
openssl_version="openssl-1.1.1q"
openssh_version="openssh-9.0p1"

#安装包地址
file="/opt"

#默认编译路径
default="/usr/local" 
date_time=`date +%Y-%m-%d—%H:%M`

#安装目录
file_install="$file/openssh_install"
file_backup="$file/openssh_backup"
file_log="$file/openssh_log"

#源码包链接
zlib_download="https://www.zlib.net/$zlib_version.tar.gz"
openssl_download="https://www.openssl.org/source/$openssl_version.tar.gz"
openssh_download="https://cdn.openbsd.org/pub/OpenBSD/OpenSSH/portable/$openssh_version.tar.gz"


Install_make()
{
# Check if user is root
	if [ $(id -u) != "0" ]; then
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
		echo -e " 当前用户为普通用户必须使用root用户运行脚本退出中......" "\033[31m Error\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	echo ""
	sleep 4
	exit
	fi

#判断是否安装wget
echo -e "\033[33m 正在安装Wget...... \033[0m"
sleep 2
echo ""
	if ! type wget >/dev/null 2>&1; then
		yum install -y wget
	else
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
		echo -e " wget已经安装了" "\033[32m Please continue\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	echo ""
	fi

#判断是否安装tar
echo -e "\033[33m 正在安装TAR...... \033[0m"
sleep 2
echo ""
	if ! type tar >/dev/null 2>&1; then
		yum install -y tar
	else
	echo ""
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
		echo -e " tar已经安装了" "\033[32m Please continue\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	fi
	echo ""

#安装相关依赖包
echo -e "\033[33m 正在安装依赖包...... \033[0m"
sleep 3
echo ""
	yum install gcc gcc-c++ glibc make autoconf openssl openssl-devel pcre-devel pam-devel zlib-devel tcp_wrappers-devel tcp_wrappers
	if [ $? -eq 0 ];then
	echo ""
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
   		echo -e " 安装软件依赖包成功 " "\033[32m Success\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	else
   	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
   		echo -e " 解压源码包失败脚本退出中......" "\033[31m Error\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	sleep 4
	exit
	fi
	echo ""
}


Install_backup()
{
#创建文件（可修改
mkdir -p $file_install
mkdir -p $file_backup
mkdir -p $file_log
mkdir -p $file_backup/zlib
mkdir -p $file_backup/ssl
mkdir -p $file_backup/ssh
mkdir -p $file_log/zlib
mkdir -p $file_log/ssl
mkdir -p $file_log/ssh


#备份文件（可修改
cp -rf /usr/bin/openssl  $file_backup/ssl/openssl_$date_time.bak > /dev/null
cp -rf /etc/init.d/sshd  $file_backup/ssh/sshd_$date_time.bak > /dev/null
cp -rf /etc/ssh  $file_backup/ssh/ssh_$date_time.bak > /dev/null
cp -rf /usr/lib/systemd/system/sshd.service  $file_backup/ssh/sshd_$date_time.service.bak > /dev/null
cp -rf /etc/pam.d/sshd.pam  $file_backup/ssh/sshd_$date_time.pam.bak > /dev/null
}

Remove_openssh()
{
##并卸载原有的openssh（可修改
rpm -e --nodeps `rpm -qa | grep openssh`
}

Install_tar()
{
#下载的源码包检查是否解压（可修改
#	if [ -e $file/$zlib_version.tar.gz ] && [ -e $file/$openssl_version.tar.gz ] && [ -e /$file/$openssh_version.tar.gz ];then
#		echo -e " 下载软件源码包已存在  " "\033[32m  Please continue\033[0m"
#	else
#		echo -e "\033[33m 未发现本地源码包链接检查获取中........... \033[0m "
#	echo ""
#	cd $file
#	wget --no-check-certificate  $zlib_download
#	wget --no-check-certificate  $openssl_download
#	wget --no-check-certificate  $openssh_download
#	echo ""
#	fi
#zlib
echo -e "\033[33m 正在下载Zlib软件包...... \033[0m"
sleep 3
echo ""
	if [ -e $file/$zlib_version.tar.gz ] ;then
		echo -e " 下载软件源码包已存在  " "\033[32m  Please continue\033[0m"
	else
		echo -e "\033[33m 未发现zlib本地源码包链接检查获取中........... \033[0m "
	sleep 1
	echo ""
	cd $file
	wget --no-check-certificate  $zlib_download
	echo ""
	fi
#openssl
echo -e "\033[33m 正在下载Openssl软件包...... \033[0m"
sleep 3
echo ""
	if  [ -e $file/$openssl_version.tar.gz ]  ;then
		echo -e " 下载软件源码包已存在  " "\033[32m  Please continue\033[0m"
	else
		echo -e "\033[33m 未发现openssl本地源码包链接检查获取中........... \033[0m "
	echo ""
	sleep 1
	cd $file
	wget --no-check-certificate  $openssl_download
	echo ""
	fi
#openssh
echo -e "\033[33m 正在下载Openssh软件包...... \033[0m"
sleep 3
echo ""
	if [ -e /$file/$openssh_version.tar.gz ];then
		echo -e " 下载软件源码包已存在  " "\033[32m  Please continue\033[0m"
	else
		echo -e "\033[33m 未发现openssh本地源码包链接检查获取中........... \033[0m "
	echo ""
	sleep 1
	cd $file
	wget --no-check-certificate  $openssh_download
	fi
}

echo ""
echo ""
#安装zlib
Install_zlib(){
echo -e "\033[33m 1.1-正在解压Zlib软件包...... \033[0m"
sleep 3
echo ""
    cd $file && mkdir -p $file_install && tar -xzf zlib*.tar.gz -C $file_install > /dev/null
    if [ -d $file_install/$zilb_version ];then
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
              		echo -e "  zilb解压源码包成功" "\033[32m Success\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	echo ""
        	else
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
              		echo -e "  zilb解压源码包失败脚本退出中......" "\033[31m Error\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
    echo ""
    sleep 4
    exit
    fi
echo -e "\033[33m 1.2-正在编译安装Zlib服务.............. \033[0m"
sleep 3
echo ""
    cd $file_install/zlib*
	./configure --prefix=$default/$zlib_version > $file_log/zlib/zlib_configure_$date_time.txt  #> /dev/null 2>&1
	if [ $? -eq 0 ];then
	echo -e "\033[33m make... \033[0m"
		make > /dev/null 2>&1
	echo $?
	echo -e "\033[33m make test... \033[0m"
		make test > /dev/null 2>&1
	echo $?
	echo -e "\033[33m make install... \033[0m"
		make install > /dev/null 2>&1
	echo $?
	else
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
		echo -e "  编译安装压缩库失败脚本退出中..." "\033[31m Error\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	echo ""
	sleep 4
	exit
	fi

	if [ -e $default/$zlib_version/lib/libz.so ];then
	sed -i '/zlib/'d /etc/ld.so.conf
	echo "$default/$zlib_version/lib" >> /etc/ld.so.conf
	echo "$default/$zlib_version/lib" >> /etc/ld.so.conf.d/zlib.conf
	ldconfig -v > $file_log/zlib/zlib_ldconfig_$date_time.txt > /dev/null 2>&1
	/sbin/ldconfig
	fi
}

echo ""
echo ""
Install_openssl(){
echo -e "\033[33m 2.1-正在解压Openssl...... \033[0m"
sleep 3
echo ""
    cd $file  &&  tar -xvzf openssl*.tar.gz -C $file_install > /dev/null
	if [ -d $file_install/$openssl_version ];then
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
              		echo -e "  OpenSSL解压源码包成功" "\033[32m Success\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
        	else
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
              		echo -e "  OpenSSL解压源码包失败脚本退出中......" "\033[31m Error\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
    echo ""
    sleep 4
    exit
    fi
	echo ""
echo -e "\033[33m 2.2-正在编译安装Openssl服务...... \033[0m"
sleep 3
echo ""
	cd $file_install/$openssl_version
        ./config shared zlib --prefix=$default/$openssl_version >  $file_log/ssl/ssl_config_$date_time.txt  #> /dev/null 2>&1
	if [ $? -eq 0 ];then
	echo -e "\033[33m make clean... \033[0m"
		make clean > /dev/null 2>&1
	echo $?
	echo -e "\033[33m make -j 4... \033[0m"
		make -j 4 > /dev/null 2>&1
	echo $?
	echo -e "\033[33m make install... \033[0m"
		make install > /dev/null 2>&1
	echo $?
	else
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
		echo -e "  编译安装OpenSSL失败脚本退出中..." "\033[31m Error\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	echo ""
	sleep 4
	exit
	fi

	mv /usr/bin/openssl /usr/bin/openssl_$date_time.bak    #先备份
	if [ -e $default/$openssl_version/bin/openssl ];then
	sed -i '/openssl/'d /etc/ld.so.conf
	echo "$default/$openssl_version/lib" >> /etc/ld.so.conf
	ln -s $default/$openssl_version/bin/openssl /usr/bin/openssl
	ln -s $default/$openssl_version/lib/libssl.so.1.1 /usr/lib64/libssl.so.1.1 
	ln -s $default/$openssl_version/lib/libcrypto.so.1.1 /usr/lib64/libcrypto.so.1.1 
	ldconfig -v > $file_log/ssl/ssl_ldconfig_$date_time.txt > /dev/null 2>&1
	/sbin/ldconfig
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
		echo -e " 编译安装OpenSSL " "\033[32m Success\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	echo ""
echo -e "\033[33m 2.3-正在输出 OpenSSL 版本状态.............. \033[0m"
sleep 3
echo ""
	echo -e "\033[32m====================== OpenSSL veriosn =====================  \033[0m"
	echo ""
		openssl version -a
	echo ""
	echo -e "\033[32m=======================================================  \033[0m"
	sleep 2
	else
	echo ""
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
		echo -e " OpenSSL软连接失败脚本退出中..." "\033[31m  Error\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	fi
}
echo ""
echo ""
Install_openssh(){
echo -e "\033[33m 3.1-正在解压OpenSSH...... \033[0m"
sleep 3
echo ""
	cd $file && tar -xvzf openssh*.tar.gz -C $file_install > /dev/null
	if [ -d $file_install/$openssh_version ];then
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
         echo -e "  OpenSSh解压源码包成功" "\033[32m Success\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
        	else
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
         echo -e "  OpenSSh解压源码包失败脚本退出中......" "\033[31m Error\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
    echo ""
    sleep 4
    exit
    fi
	echo ""
echo -e "\033[33m 3.2-正在编译安装OpenSSH服务...... \033[0m"
sleep 3
echo ""
	mv /etc/ssh /etc/ssh_$date_time.bak     #先备份
	cd $file_install/$openssh_version
	./configure --prefix=$default/$openssh_version --sysconfdir=/etc/ssh --with-ssl-dir=$default/$openssl_version --with-zlib=$default/$zlib_version >  $file_log/ssh/ssh_configure_$date_time.txt   #> /dev/null 2>&1
	if [ $? -eq 0 ];then
	echo -e "\033[33m make -j 4... \033[0m"
		make -j 4 > /dev/null 2>&1
	echo $?
	echo -e "\033[33m make install... \033[0m"
		make install > /dev/null 2>&1
	echo $?
	else
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
		echo -e " 编译安装OpenSSH失败脚本退出中......" "\033[31m Error\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	echo ""
	sleep 4
	exit
	fi
	
	echo ""
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
		echo -e " 编译安装OpenSSH " "\033[32m Success\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	echo ""
	sleep 2
	echo -e "\033[32m==================== OpenSSH—file veriosn =================== \033[0m"
	echo ""
		/usr/local/$openssh_version/bin/ssh -V
	echo ""
	echo -e "\033[32m======================================================= \033[0m"
	sleep 3
	echo ""

echo -e "\033[33m 3.3-正在迁移OpenSSH配置文件...... \033[0m"
sleep 3
echo ""
#迁移sshd
	if [ -f  "/etc/init.d/sshd" ];then
		mv /etc/init.d/sshd /etc/init.d/sshd_$date_time.bak
	else
		echo -e " /etc/init.d/sshd不存在 " "\033[31m Not backed up(可忽略)\033[0m"
	fi
	cp -rf $file_install/$openssh_version/contrib/redhat/sshd.init /etc/init.d/sshd;

	chmod u+x /etc/init.d/sshd;
	chkconfig --add sshd      ##自启动
	chkconfig --list |grep sshd;
	chkconfig sshd on
#备份启动脚本,不一定有
	if [ -f  "/usr/lib/systemd/system/sshd.service" ];then
		mv /usr/lib/systemd/system/sshd.service /usr/lib/systemd/system/sshd.service_bak
	else
		echo -e " sshd.service不存在" "\033[31m Not backed up(可忽略)\033[0m"
	fi
#备份复制sshd.pam文件
	if [ -f "/etc/pam.d/sshd.pam" ];then
		mv /etc/pam.d/sshd.pam /etc/pam.d/sshd.pam_$date_time.bak 
	else
        echo -e " sshd.pam不存在" "\033[31m Not backed up(可忽略)\033[0m"
	fi
	cp -rf $file_install/$openssh_version/contrib/redhat/sshd.pam /etc/pam.d/sshd.pam
#迁移ssh_config	
	cp -rf $file_install/$openssh_version/sshd_config /etc/ssh/sshd_config
	sed -i 's/Subsystem/#Subsystem/g' /etc/ssh/sshd_config
	echo "Subsystem sftp $default/$openssh_version/libexec/sftp-server" >> /etc/ssh/sshd_config
	cp -rf $default/$openssh_version/sbin/sshd /usr/sbin/sshd
	cp -rf /$default/$openssh_version/bin/ssh /usr/bin/ssh
	cp -rf $default/$openssh_version/bin/ssh-keygen /usr/bin/ssh-keygen
	sed -i 's/#PasswordAuthentication\ yes/PasswordAuthentication\ yes/g' /etc/ssh/sshd_config
	#grep -v "[[:space:]]*#" /etc/ssh/sshd_config  |grep "PubkeyAuthentication yes"
	echo 'PermitRootLogin yes' >> /etc/ssh/sshd_config

#重启sshd
	service sshd start > /dev/null 2>&1
	if [ $? -eq 0 ];then
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
		echo -e " 启动OpenSSH服务成功" "\033[32m Success\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	echo ""
	sleep 2
	#删除源码包（可修改
	rm -rf $file/*$zlib_version.tar.gz
	rm -rf $file/*$openssl_version.tar.gz
	rm -rf $file/*$openssh_version.tar.gz
	#rm -rf $file_install
echo -e "\033[33m 3.4-正在输出 OpenSSH 版本...... \033[0m"
sleep 3
echo ""
	echo -e "\033[32m==================== OpenSSH veriosn =================== \033[0m"
	echo ""
		ssh -V
	echo ""
	echo -e "\033[32m======================================================== \033[0m"
	else
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
		echo -e " 启动OpenSSH服务失败脚本退出中......" "\033[31m Error\033[0m"
	echo -e "\033[33m--------------------------------------------------------------- \033[0m"
	sleep 4
	exit
	fi
	echo ""
}

End_install()
{

##sshd状态
	echo ""
	echo -e "\033[33m 输出sshd服务状态 \033[33m"
	sleep 2
	echo ""
	systemctl status sshd.service
	echo ""
	echo ""
	echo ""
	sleep 1
	
echo -e "\033[33m==================== OpenSSH file =================== \033[0m"
echo ""
	echo -e " Openssh升级安装目录请前往:  "
	cd  $file_install && pwd
	cd ~
	echo ""
	echo -e " Openssh升级备份目录请前往:  " 
	cd  $file_backup && pwd
	cd ~
	echo ""
	echo -e " Openssh升级日志目录请前往:  "
	cd  $file_log && pwd
	cd ~
	echo ""
echo -e "\033[33m======================================================= \033[0m"
}


Install_make
Install_backup
Remove_openssh
Install_tar
Install_zlib
Install_openssl
Install_openssh
End_install