华为ENSP路由＋交换机实验配置

一、拓扑图

配置要求

• PC1 和 PC3 能 Ping 通 PC5
• PC2 能 Ping 通 PC4
• PC6 能 Ping 通 PC4但是不能Ping 通 PC2

小小构思

二、主机配置

PC1

PC2

PC3

PC4

PC5

PC6

三、交换机与路由器运行代码

SW1

sysname SW1
undo info-center enable
vlan batch 10 20

interface Ethernet0/0/1
 port link-type access
 port default vlan 10
#
interface Ethernet0/0/2
 port link-type access
 port default vlan 20
#
interface Ethernet0/0/3
 port link-type access
 port default vlan 10
#
interface Ethernet0/0/4
 port link-type trunk
 port trunk allow-pass vlan 2 to 4094
#
interface Ethernet0/0/5
 port link-type access
 port default vlan 20

SW2

sysname SW2
undo info-center enable
vlan batch 10 20
#
interface Ethernet0/0/1
 port link-type access
 port default vlan 20
#
interface Ethernet0/0/2
 port link-type access
 port default vlan 10
#
interface Ethernet0/0/3
 port link-type trunk
 port trunk allow-pass vlan 2 to 4094

R1

sysname R1
undo info-center enable
#
interface GigabitEthernet0/0/0
 ip address 192.168.20.1 255.255.255.0
#
interface GigabitEthernet0/0/1
 ip address 10.0.0.1 255.255.255.0
#
ip route-static 192.168.60.0 255.255.255.0 10.0.0.2

R2

<R2>sys
[R2]dis cu
sysname R2
undo info-center enable
#
interface GigabitEthernet0/0/0
 ip address 10.0.0.2 255.255.255.0
#
interface GigabitEthernet0/0/1
 ip address 192.168.60.1 255.255.255.0
#
ip route-static 192.168.0.0 255.255.0.0 10.0.0.1

四、检验结果

1. PC1 和 PC3 能 Ping 通 PC5

2.PC2 能 Ping 通 PC4

3.PC6 能 Ping 通 PC4但是不能Ping 通 PC2